Morning all i am still busy with planning my tanks and next step is to plan the wiring and lighting etc, currently i have 1 thermostat which is controlling 2 heat pads (it is an 800w thermostat and currently only has 28w connected to it).
My thought was to hook up the outgoing end of the thermostat to a "14 socket multiplug" this would allow me to wire each heat pad to a 3 pin plug, place it in a multiplug socket and then run everything off the 1 thermostat.
Was thinking of doing something similar for the lights but they will just go directly into the multiplug and ill use the 4w LED lighbulbs.
I am no electrician so this might be totally crazy and insane. LOTS of advice needed/ welcome
Thanks!